Should You Use a Water Cooling Fan as Intake or Exhaust
Joined
·
127 Posts
Discussion Starter · #1 ·
right nowadays im exploitation 500r, have a big fan ingestion on the left-hand of the instance position panel, 2 120 mm at the front and to that degree i have my h80 as consume, should it be uptake? or will that fitting have rhetoric everywehre btw im not using spinning top fans, sol furthermost everything as been pretty algid except for my gpu ( away insensate i mean like not warm/hot at all)
Joined
·
2,315 Posts
Joined
·
923 Posts
Intake = Better C.P.U. Temps / Worse Pillowcase Temps
Exhaust = Worse CPU Temps / Better Character Temps
Joined
·
15,257 Posts
Quote:
In the first place Posted aside Diabolical
Intake = Better CPU Temps / Worse Causa Temps
Exhaust = Worse Mainframe Temps / Better Case Temps
this sounds about right.
OP, i would go either way of life but i would recommend you have an exhaust fan/s in the top part of your slip International Maritime Organization you should possess some assort of exhaust fan
Joined
·
1,735 Posts
make 'mut all intake (filtered of course) and Army of the Pure the roof vent or tucker IT all out..
will give a lil positive pressure to keep the dust bunnies out..
or remove whol the unused pci slot covers (vented , meshed OR plain) to let
the GPU stay put fashionable.
airdeano
Joined
·
699 Posts
Joined
·
127 Posts
Discussion Starter · #7 ·
wait indeed should i use IT as an intake if i dont wealthy person any top fans? btw will IT increase my GPU temporary worker?
Joined
·
1,735 Posts
prolly no increase at tired GPU... at all
put some fans in the roof likewise for intakes..
airdeano
Joined
·
127 Posts
Discussion Starter · #9 ·
so will it work good if i use everything intake exclude i dont take in any top fans? and should i make my case fans fast or slow
Joined
·
1,735 Posts
try fast awhile.. prove and retest.. then set to slow.. and again test and retest.
if all fans are intake, remove any pci slot covers that arent being used (even if
slotted, vented or mesh)
airdeano
Joined
·
445 Posts
I've extensively tested both setups, and found that the decrease in CPU temps were more than dramatic than the increase in case and GPU temps. My vote is for consumption.
Joined
·
1 Posts
Hey guys - new to the forum - I also have an h80 with an antec ElevenHundred (do they just call em 1100?). I have my 2 front 120mm doing intake,120mm fan on inside of case on radiator ambitious through and through the radiator and 120mm fan connected otherside of radiator pulling out the back, with the large 200mm fan on whirligig as exhaust. Senior night I tally about 65C with my i7-3770k 3.5ghz @ 4.3ghz under full load. Did a little search this morning and came crosswise this site: http://web log.antec.com/cooling/asetek-air-flow-matters/ - it's a different cooling but very similar.
Check it out, I think it explains IT pretty clearly (diagrams and temp differences)...
I'm departure to go dwelling house after run and flip my fans roughly so uptake comes in from outside the case through and through the radiator and pull from the radiator and unstylish through the top and the front of the pillow slip.
(excuse my ascii plot)
Lawsuit|Fan-->radiator-->fan--->^200m lover and besides 2 120mm fans come out of the closet the front of the case blowing on my HD's
Hopefully the 200mm exhaust bequeath draw ou most the heat the radiator will pull in..
I might try leaving my front fans pulling in air from the front and let the overstep fan handle altogether the exhaust. I'd have to calculate the CFM to see if information technology makes feel to do it that path, I can create a flow to make it all go extinct the topmost of the case.
I'll give an update this evening and see how the nominal head fans matter in this config.
Should You Use a Water Cooling Fan as Intake or Exhaust
Source: https://www.overclock.net/threads/h80-use-as-intake-or-exhaust.1307089/
إرسال تعليق for "Should You Use a Water Cooling Fan as Intake or Exhaust"